SABIC Innovative Plastics have introduced hybrid and electric car batteries stack with new material
SABIC Innovative Plastics in early May 2010 Launch of Advanced Noryl and Valox resin grades vehicles, hybrid vehicles using objective (HEVs), plug-in hybrid electric vehicles (PHEV) and electric vehicles (BEV) with battery. SABIC Innovative Plastics is a top global manufacturer of petrochemicals five Saudi Basic Industries Corporation (SABIC), a wholly owned subsidiary.
large cell stack in the average asus a32 f3 battery weight of the car up to 300 kilograms (about 661 pounds), large cell stack to reduce the extra weight in a number of different applications, such as the battery case, can use plastic on behalf of the steel. This approach has been used by some car manufacturers.
SABIC Innovative Plastics Noryl production phenylene oxide (PPO) and Valox terephthalate (PBT) resin was selected for the cellular components, including frame and hull. These resins also less weight, chemical resistance and temperature resistance, dimensional stability and flame retardancy.
Unlike lead acid from automobiles, new and more energy density battery cell consists of several independent cells, and that these cellular structures and their electronic control systems must maintain strict dimensional stability. Stacked with so many elements asus f3 battery are space constraints, very limited due to licensing conditions, and even a bit of instability can lead to bias, leakage, or may cause damage.
SABIC Innovative Plastics Noryl GTX resin and Noryl this withdrawal lowest initial deformation and injection molding, low water absorption, which can minimize changes in size and mechanical properties, and lower and more stable coefficient of thermal expansion (CTE). These features help to maintain the cell high-end system performance and battery stability, either as temperature, humidity and load potential changes in the environment may occur as well.
Nory phenylene ether polymer resin is an amorphous, its wide temperature asus a9 battery range can maintain its rigidity, it can not use glass or other filler can also ensure that the performance time, and in the crystalline polyamide resin, such as Use When glass Zexu use or other filler, polyamide due to anisotropic shrinkage / growth and size did not cause stability problems. The family of low cost Noryl resins can provide these benefits without compromising the battery coolant, such as resistance to chemicals commonly used ethylene glycol.
Battery electric vehicles also with its greater power and energy density of lithium ion and new advances in lithium polymer become more attractive. Under normal circumstances, the battery can operate at temperatures well controlled, the temperature of the battery management is essential. To cool down, often cooled by liquid cooling instead of air to have greater efficiency. Therefore, these liquids asus z96 battery must cope with high demands on chemical resistance of engineering thermoplastics. In addition, if the power of the battery discharge, the battery will heat up, which requires the appropriate use of materials resistant to heat.
SABIC Innovative Plastics offers a wide range of materials to these properties, including Ultem polyetherimide (PEI) resin, which has a high heat resistance and inherent flame resistance, and Valox PBT resin, which has high heat and chemical resistance.
In the hybrid electric vehicle (HEV), the more tension, more importantly, electromagnetic interference / radio frequency interference (EMI / RFI) shielding, control the various electronic components such as inverters, electronic control unit and battery ibm thinkpad x60 battery management system and other potential interference generated. SABIC Innovative Plastics’ LNP Faradex mixtures can provide special shielding EMI / RFI, without feeling the weight of metal or metal-based risks to the environment.