Electric Vehicles

DIY Electric Car Conversion – Can You Convert Your Vehicle to an Electric Car All by Yourself?

Nowadays there are many people who are considering doing on electric car conversion. Gasoline expenses are a major issue in the majority of households, so it makes a lot of sense to look for an alternative energy source.

Unfortunately, buying a brand new electric car can be quite expensive and so is hiving a professional mechanic to retrofit you car into an electric vehicle. In most cases you will be charged $3,000-$4,000, so this is definitely not a very cheap option, but certainly much cheaper than buying an electric vehicle.

The best thing you can do is to use a manual that can give you all the necessary instructions, in order to do the conversion yourself. The whole process is easier than it sounds.

You first need to replace the internal combustion engine with an electric motor and also remove all the gas engine parts, like the tank, the radiator and the fuel lines. After that, you will need some nuts and bolts, power conductors and a power controller. You must also install a batteries rack with rechargeable batteries that will give power to the motor.

Most EVs need about 10-15 units of batteries. The cost of the materials is very low, so you don’t need to worry about that. To do the conversion you only have to use simple tools found in any household like wrenches, saws and drills.

By building your own EV you can:

* Save hundreds of dollar on gas every month.

* Pay less for maintenance costs.

* Drive up to 200 miles on a single charge.

* Get a better horse power.

* Receive refunds from the IRS for driving a car that is friendly to the environment.

* Stop emitting harmful fumes and protect the environment.

* Get a better engine’s performance.

* Pay only 1 dollar for every charge.

The conversion will only cost you a few hundreds dollars, but the most important step that can make the difference between success and failure is to find a good set of plans. You need to get access to easy-to-follow instructions and illustrations that can show exactly what you need to do step by step. You can find some very reliable DIY manuals online that can guide your through the whole process and even tell you where you can find cheap materials.

Thousands of people all over the world are currently using this technology in order to eliminate their gas costs and protect the environment.

Leave a Reply

Your email address will not be published. Required fields are marked *